What kind of panel is selected for the cabinet?

The most used in the kitchen is the countertop. If the quality of the countertop is not good, it will affect the use of the whole cabinet. So what kind of panel is chosen for the cabinet? In fact, which door is chosen not only considers personal preference, but also involves materials. Stability and durability, there are currently five common cabinet door panels on the market, each of which has its advantages and disadvantages, Xiaobian for everyone to compare:

First, natural stone countertops

The natural stone countertops are divided into granite countertops and marble countertops. The difference between the two countertops is that the appearance is different. The marble pattern is softer, the appearance is the texture of the biological remains, the surface stripe distribution is not regular; and the granite is slightly white or gray. The appearance is spotted, and the addition of potassium feldspar makes it red or flesh-colored.

The advantages of both are about the same, the hardness is high, the wear resistance is good, and the slight scratches are not particularly conspicuous; but they also have the common disadvantage that the surfaces of the two have seams, which are easy to hide; The hardness of the two is relatively large, so when two pieces of stone are required to be bonded, there is no gap, and these gaps will accumulate dirt in the future use, resulting in an unattractive appearance of the table.

Second, artificial stone countertops

The artificial stone countertop is the countertop that is used more now. The main reason is that it has many advantages, mainly including the following four points:

1. Abrasion resistance, acid resistance, high temperature resistance, these three points just meet the kitchen countertop surface requirements, very suitable for daily use.

2. There is no pore on the surface of the countertop, and dirt such as oil stains and water stains will not penetrate into it, so that it will not appear dirty even after long-term use.

3. If the cabinet requires a long countertop, the artificial stone can be seamlessly bonded without any gaps.

4. If the surface is scratched, use a gauze paper to polish it so that it does not leave marks on the surface.

Third, stainless steel countertops

The biggest advantage of the stainless steel countertop is that it is easy to clean and is very suitable for lazy people. However, the disadvantage is that it can not be used in the corner of the cabinet, and if it is scratched on the surface, it will not be repaired, so that the trace will remain on the table. Affect the appearance.

Fourth, fireproof countertops

The advantage of the refractory board countertop is that it is brightly colored and can satisfy the sensory enjoyment of the decoration owner; and its wear resistance and high temperature resistance are better.

Its disadvantages are:

1. It is not suitable for the corner countertop of the corner. If the refractory board is used as the corner, other processes are needed to make up the crack in the middle.

2. The moisture resistance of the refractory plate countertop is not good. If there is water stain on the table surface for a long time, it will cause deformation and affect the use.

Five, granite

Advantages: Granite has high density, high hardness and wear surface. It is also one of the materials frequently used in home decoration. Compared with natural marble, granite has better antibacterial regeneration ability in materials that can be used in kitchen countertops.

Disadvantages: The length of natural stone as a countertop material is usually not long, so if you want to make a long overall table (especially U-shaped, L-shaped countertops), there will definitely be seams, these seams are also easy to hide. dirt.

[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " a letter from a cabinet dealer to the manufacturer ", want to communicate with peers to join the Jiuzheng building materials network cabinet exchange group]

Superabrasives are tools used in precision grinding,precision cutting,precision polishing and precision drilling,like Flexible Diamond Abrasive.Superabrasive materials attach to a wheel,blade and drill to make Superabrasive Grinding Wheels,cutting balde and drilling bit.The reason some abrasives are Superabrasives is due to their extraordinary hardness,unparalleled performance,and longevity.
What are Superabrasives?
Abrasives that belong to the Superabrasive family includes,Industrial diamonds: an industrial diamond is a non-gem quality small diamond that is for abrasives,cutting,and drilling tools.
Cubic boron nitride (CBN): Usually called CBN it is the second hardest cutting tool material after a diamond.
Polycrystalline: Is an abrasive material that has a multiple collection of crystal grain structures with individual orientations
CVD Diamond: These are synthetic diamonds made by a process known as chemical vapor deposition.CVD diamonds grow from a hydrocarbon gas mixture. They are extremely hard,have a high thermal conductivity that is five times that of copper. They also have broadband optical transparency,are chemically inert,and only reach graphitization at very high temperatures.
Nanodiamonds: These tiny diamonds are the product of a controlled explosion. Sometimes called a detonation nanodiamond (DND) or an ultradispersed diamond,as this is how they form.
Industries That Use Superabrasives
A great number of industries use Superabrasive grinding wheels and the coated abrasives subsection of the abrasives industry continues to grow. Industries that are prime buyers of Superabrasive grinding wheels are,

Electroplated Diamond Products

Superabrasives Precision Cutting,Superabrasives Precsion Polishing,Superabrasive Grinding Wheels,Profiled Superabrasive Grinding Wheels,Flexible Diamond Abrasive

Hans Superabrasive Material Co., Ltd. , http://www.hansuperabrasive.com