Imported pneumatic diaphragm pump precautions are there?
Blowing Agent,Defoaming Agent,Natural Foaming Agent,Anti Foaming Agent Jiang Xi Hi-Tech Technology Co.,Ltd. , https://www.hi-techmasterbatch.com
Imported pneumatic diaphragm pump incorporates advanced technologies at home and abroad, rare things, many people buy pneumatic diaphragm pump in between domestic and foreign products, will prefer to choose imported products, then import Pneumatic diaphragm pump use what are the precautions? Because the imported pneumatic diaphragm with the possibility of solid particles in the gas is very large, so when we use the device can not be the exhaust port is facing the staff, so as to avoid personal injury. If there is a problem with the diaphragm of a pneumatic diaphragm pump, then we should discharge the contents of the pneumatic diaphragm pump out of the exhaust muffler. Because of the pressure of the material being transported, we must pay attention to the control of the pressure when using the diaphragm pump. If the pressure is too high, the personal safety will be threatened. When the diaphragm pump is pressurized, Perform any maintenance work on the equipment and, if repairs are necessary, cut off the air intake of the equipment and open the pressure relief so that the pressure in the delivery pipe is reduced. After that, slowly connect the streets connecting the individual pipes release. If the material of the equipment delivery pipe is aluminum alloy, then care should be taken not to use it to transport liquids that contain chemicals that react with it, to prevent pipe corrosion and explosion. Also in the use of imported pneumatic diaphragm also pay attention to the diameter of the particles contained in the transport of liquid, pay attention to the maximum diameter of the particles can not exceed the maximum allowable diameter of the device, because within its allowable range of particles can safely pass through the device, and more than It allows the diameter of the particles will easily settle, plug the equipment transmission pipeline, causing danger. Because the work of the device if the net spark will cause an explosion, so when connecting the import pneumatic diaphragm pump, use a large enough area of ​​the wire, and in accordance with laws and regulations for grounding. The use of imported pneumatic diaphragm pump can produce important effect and contribution. When using imported pneumatic diaphragm pump, it often encounters the transportation of all kinds of chemical corrosive liquids. Only by operating safely can it ensure that these liquids are discharged to Designated location. For safety, we should pay attention to how to use it when we use imported pneumatic diaphragm. This article is copyrighted industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / micro-channel:) starting: http: //beng.liuti.cn / (Service Hotline:)