The necessity of installing security gates
Poly Aluminium Chloride Flocculant (PAC), Chloinated Polyethylene (CPE), Tripe Sodium Phosphate, Disodium Phosphate YIBIN PERFEC INTERNATIONAL TRADE CO.,LTD , https://www.yibinbofei.com
1. Background Overview
With the continuous development of the social economy, the price of raw materials has skyrocketed, and the management of products and raw materials produced by the factory is becoming more and more important. Management methods to prevent the loss of products and raw materials are imminent.
On the premise of not infringing on the personal rights of each employee, production management is carried out using scientific and technological means such as security gates and metal detectors. Civil air defense and technical defense are effectively combined to become a true guardian of corporate property.
Second, the purpose of installation
Mainly inspect the internal employees of the factory when entering or leaving the workshop or factory to prevent internal employees from carrying the company's copper products, rare metal products, stainless steel products or raw materials out of the factory, preventing the loss of products and raw materials and protecting the company's property Security.
3. Installation environment requirements
The security gate is suitable for installation in the workshop, stairway or factory gate, etc. It is not suitable for outdoor installation, to prevent wind and rain. If it is installed outside the factory gate and other outdoor conditions, it must be covered by the corresponding rain shed. The installation location of the hao security door should be about 5cm above the ground, and there should be no large metal objects within 1 meter of the surrounding area. There is unnecessary external metal interference when working, thereby improving the inspection accuracy and accuracy of the security door.
Fourth, the choice of installation location
1. Inside the entrance of the production workshop
2. The workshop is exported to the channel of the staff locker
3. The gate of the factory gate (requires rainproof facilities)
4. Other designated places
V. Inspection scope and actual operation of applicable products
The detected metal products are no less than the metal content of the size of 1 yuan coin, which can accurately detect the location carried in the human body. According to customer needs, the sensitivity can be adjusted to achieve the best alarm detection effect.
1. If the actual metal content of the detected product is large, the sensitivity can be adjusted to shield the metal buttons, zippers, belts, keys, coins, mobile phones and other metals in human clothing, and the metal beyond the specified range will generate an audible and visual alarm.
2. If the detected metal product or raw material is equivalent to the metal on the human body clothing or the metal carried, employees may be required to put the metal objects in the clothing box as far as possible, or place a long table and an object basket next to the security gate 4. Conveyor belt, which is convenient for employees to take out metal objects when they leave the workshop and then go through the security gate, thus reducing the area of ​​possible alarm. Area security with alarms can be further checked with hand-held metal detectors, which increases the speed of personnel, improves work efficiency and supervision.