How to clean and remove aluminum hardware products? The choice of precision aluminum cleaner?
Pipe Fitting mainly used for pipes' connection which widely applied to petroleum and gas pipeline, chemical, power plant, and shipbuilding industries. The products include elbow, tee, reducer and cap
Material: Carbon Steel & Alloy Steel&Aluminum Steel
JIS & DIN Standard
1/2"-24"
Welded Pipe Fitting Size
26"-100"
How to clean and remove aluminum hardware products? The choice of precision aluminum cleaner?
Different materials in hardware processing enterprises have different requirements, and aluminum product processing enterprises are more difficult to handle the cleaning and inventory problems of products. This article explores how to clean aluminum hardware, only for the cleaning and inventory of high-demand precision aluminum products.
Precision aluminum parts generally require cleaning to not corrode the substrate, and can not affect the original bright color of the aluminum. Therefore, ordinary aluminum degreasing or aluminum acid removal and other low-grade aluminum cleaning agents cannot be used. "Aluminolysis" mainly uses acid as a raw material to release a gas by chemical reaction with an aluminum substrate, and gas is generated and discharged from the surface of the workpiece to separate the oil stain from the workpiece. However, the aluminum piece after the "aluminum acid removal" caused white alumina on the surface due to the chemical reaction, and the entire workpiece became white, losing the original bright color of the aluminum material, and the workpiece size also changed accordingly.
Therefore, we recommend using a neutral aluminum cleaner for cleaning without reacting with aluminum, without affecting the original color and without affecting the size of the workpiece.
Evergreen Peak Aluminum Cleaner is mainly formulated from a variety of degreasing surfactants, builders and protective agents for aluminum. The PH value is 7, which is a truly highly concentrated neutral detergent product. When used, it is mixed with water for 15-30 times and heated for use. The basic process recommendations are: ultrasonic cleaning - rinsing - rinsing - drying. According to the cleanliness requirements, Evergreen Peak Company can carry out process design recommendations, welcome to consult.
The main point of the cleaning agent is whether the aluminum cleaning agent is neutral or unsatisfactory, because it is well known that aluminum products, especially die-cast aluminum materials, often suffer from long-term mold problems during storage. On the surface, there is a white hairy substance, similar to mildew. If you remove the mildew, you will find gray or black spots underneath. This is a phenomenon in which the aluminum material has an oxidation reaction with aluminum on the surface during the storage process. Therefore, in addition to being neutral, the aluminum cleaning agent does not react chemically with the aluminum material, and is easy to rinse without residue. It should also have a protective effect on the aluminum material to enhance the anti-oxidation and anti-corrosion ability of the aluminum material itself in the subsequent inventory process. In response to these two basic requirements, Shenzhen Evergreen Chemical Technology Co., Ltd. developed a professionally targeted aluminum cleaning agent when it was engaged in the research and development of cleaning agents, combining various aspects and requirements of aluminum processing.
Standard: ASME Standard, ASTM Standard, JIS Standard, DIN Standard, EN Standard, MSS Standard, NACE Standard
Wall Thickness: ASTM Standard: SCH5s, SCH10s, SCH20, SCH30, SCH40, SCH60,SCH80, SCH100, SCH120, SCH140,SCH160, STD, XS, XXS;
Butt Welded Pipe Fitting,Welded Pipe Fitting,Seamless Pipe Fitting
MATERIAL
Carbon Steel :
ASTM A234 WPB; 20#, 10#
DIN St37, St45.8, St52.4,St.35.8,St.35.8.
Stainless Steel:
304 304L 316 316L
Alloy Steel:
16Mn St45.8 A420 WPL6, A234 WP5, WP9, WP91, WP92, WP11, WP22, etc
ASTM A860 WPHY42, WPHY46,WPHY52,WPHY60,WPHY65,WPHY70
STANDARD
ASTM / JIS / DIN / BS / GB / GOST
MODEL
1.Tee(Straight and Reducing) 2.180 DEG Return
3.Elbow (45/90/180 Degree) 4.Cap
5. Reducer(Concentric and Eccentric)
TYPE
Seam Or Seamless
SURFACE
Black Paint, Anti Rust Oil, Hot-Dipped Galvanize
WALL THICKNESS
SCH5S, SCH10, SCH20, SCH30, SCH40, STD,XS,SCH60,
SCH80, SCH100, SCH120, SCH140, SCH160, XXS,
SIZE
1/2"-100"
CONNECTION
Welding
SHAPE
Equal, Reducing
APPLICATION
Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Customers' drawings or designs are available.
PACKAGE
1> 1/2" - 2" in cartons.
2>Above 2" in wooden cases.
Big size is workable by pallets.
DELIVERY DETAILS
According to the quantities and specifications of each order.
Normal delivery time is from 30 to 45 days after receiving the deposit.
Pipe Fitting
Pipe Fitting,Seamless Pipe Fitting,Butt Welded Pipe Fitting,Welded Pipe Fitting
HEBEI HANMAC MACHINE CO., LTD. , http://www.chinahanmac.com