Bathroom tile purchase guide

Tiles are an important part of bathroom waterproofing and an important part of bathroom decoration. How to choose the bathroom tiles? Whether it is the color or texture of the tiles, there are skills to buy.

The choice of bathroom wall tiles: the bathroom walls must be covered with water-resistant tiles and anti-corrosion and anti-mold tiles (or glass tiles); the choice of bathroom floor tiles: the floor is best to use anti-slip floor tiles with raised patterns.

How to choose the bathroom tile index 1: tile texture density

Tiles for the purchase of bathroom space have stricter requirements on the quality of the tiles themselves. When purchasing tiles, you can see from the side whether the brick surface is flat and whether there are pinholes with uneven thickness. At the same time, the tile can be tapped to hear whether the sound is crisp and the sound is more brittle, indicating that the tile has a high density and a good hardness.

How to choose the bathroom tile index two: tile water absorption rate

Tiles for the purchase of bathroom space should first pay attention to its water absorption rate. In general, high quality tiles have a low water absorption rate so they can dry quickly. If the tile does not indicate the water absorption rate, you can use tea or water droplets on the back of the tile. After a few minutes, the degree of diffusion of the water droplets is observed. The less water is absorbed, the lower the water absorption rate and the better the quality.

How to choose the bathroom tile index three: the degree of glaze on the brick surface

When purchasing, it can be identified by judging the thickness of the glaze on the tile surface. The surface of the brick can be scraped with a hard object, and if a scratch occurs, it means that the glaze is insufficient. After the thinner glaze layer on the tile surface is polished, the brick surface is easily stained, difficult to clean, and lacks safety. Some unglazed floor tiles are generally not suitable for being placed in a damp and closed environment. Because the pores on the bricks absorb water and cannot diverge, they can also cause mold.

How to tile color in bathroom:

The color of the bathroom tiles may first be chosen according to the overall style of the bathroom, followed by the color that you like. However, for most small-sized families, the color of the bathroom tiles is best to choose light-colored tiles, do not choose black or dark. The light color refracts the line of sight from the light, making the bathroom look more spacious and bright.

What tiles are used in the bathroom:

The bathroom usually has a relatively high humidity, and the requirements for the tile are waterproof, slip resistant and wear resistant. The bathroom floor tiles are generally made of whole body bricks, which have good non-slip wear resistance; the bathroom wall tiles are usually made of glazed tiles, and the glazed tiles are rich in glazed color patterns and have strong anti-pollution ability.

Summary: The choice of bathroom tiles looks simple, but there are some little learning in it. Whether it is the color or quality of the tiles, there are many places to pay attention to. It is important to choose a non-slip, wear-resistant tile in the bathroom, which is also for your own safety.

The picture below attached showed our aluminum lock Nuts. Black, red, blue, purple, pink, green, silver,orange, and gold color are our popular colors. Aluminum Flange lock nuts,aluminum Flange serrated lock nuts, aluminum self-locking nuts, aluminum hex nuts etc are available. But different Sizes and colors could be customized according to your draiwngs or requirements. Both 6061-T6 aluminum lock nuts and 7075-T6 aluminum lock nuts could be offered. If you need special packing service for the nylon Washers including special package boxes, it is also ok for us. Any questions or demand, please feel free to contact us.

Aluminum Nut

Aluminum Nut,Aluminum Blind Rivet Nut,Injection Molded Aluminum Nut,Aluminum Barrel Nut

Hobby Carbon CNC Technology(Shenzhen) Limited , https://www.hobbycarbon.com