The steel door is used as a security door and many people are fooled

There are all kinds of anti-theft doors, but whether the anti-theft doors can be anti-theft, whether the thickness of the steel plate and the fillers meet the standards, many citizens are unclear. Yesterday, the Public Security Technology Management Office of the Public Security Bureau of Changchun City (referred to as the Technology Office) An unannounced inspection of the anti-theft door market around Jianzheng Road, Chaoyang District, Changchun City, found that many metal entry doors on the market were confusing audio-visual, posing as anti-theft doors.

Enter the door to sell under the guise of a security door

On May 23, the police of the Technical Department first came to the Meiling anti-pry gate distribution office at No. 2 Jianzheng Road. After inspection, the police found that all the sales in the shop were steel entrance doors. A dealer also admitted that they did not have anti-theft Doors are all entrance doors. However, when the police inspected the invoices, they found that the 19 sales invoices issued to customers by the sales office all read "Anti-theft door" in the column of selling products.

In this regard, Zhao Wanshu, deputy investigator of the Technical Department, said that many businesses are currently selling metal (steel) entry doors (referred to as entry doors) under the guise of "anti-theft doors", but the types and quality of entry doors are inspected. The standards are lower than anti-theft doors, so that the phenomenon of "anti-theft doors" is not anti-theft.

During the inspection, the police also found that the inspection report provided by the sales unit of multiple home appliance control locks was altered or forged. Zhao Wanshu said that the inspection reports provided by the "Jinxin Hongda 1073" electronic control lock produced by Zhongshan Hongda Electronics and the electronic control lock produced by Zhongshan Anxing Lock Factory were all forged.

Play tricks on the name for hiding

In yesterday's inspection, the reporter found that there are many kinds of "anti-theft doors" on the market, including steel doors, armored doors, security doors, protective doors, etc., but on the national standard catalog of the National Standards Committee, only anti-theft The relevant standards of the door do not have the corresponding standards of the above categories, or even such names. In fact, this is some companies who know that their products do not meet the requirements of anti-theft doors, and play word games to avoid investigation and prosecution by the quality inspection department.

The fake anti-theft door is filled with cardboard in the middle

In addition, according to industry insiders, according to national standards, the thickness of the steel plate of the anti-theft door body should reach 1.0 mm, while the thickness of the steel plate of many entry door doors is actually only 0.75 mm.

In addition, the anti-theft door must be filled with reinforcement and fireproof materials. However, in order to reduce costs, the door or door is often filled with cardboard or wooden board. Once there is a temperature difference, the cardboard or wooden board will be deformed, and the fireproof and anti-theft door will not be obtained. effect.

The cost of a real security door is at least 600 yuan

The prices of fake anti-theft doors are generally relatively low. An anti-theft door agent calculated an account for the reporter. At present, the price of a 1 mm thick steel panel on the market is 7200 yuan / ton. According to the size of the anti-theft door, if you want to meet the general technical conditions of the national standard anti-theft door, do it. The cost of the metal sheet of the door is nearly 500 yuan, plus the cost of locks, filling materials, painting and polishing, and workers' wages. The cost of a door is at least 600 yuan, so anti-theft doors less than 600 yuan are likely to be unqualified.

All units must replace qualified products

In order to protect the legitimate rights and interests of consumers, yesterday the Technical Department put forward requirements for the construction and development enterprises and security door production and sales departments of Changchun City: each store that sells security doors and door entrances must be strictly classified, and cannot be sub-filled or sold. There is no inspection report or expired electric control lock. Once found, it will be seriously investigated and punished. All construction development companies must not use fake and inferior products during installation. At the same time, I hope that all units in Changchun have used Hongda and Anxing electric control locks. , The qualified electric control lock must be replaced. If a citizen wants to identify the authenticity of his security door, or to report a counterfeit door manufacturer, he can dial 0431-88908894.

Teach you to identify the authenticity of the security door

1. The anti-theft door must have the "F (anti-theft) A (security) M (door)" sign, but the entrance door does not have this sign.

2. The overall weight of the anti-theft door produced by Yixin according to the regular process is not less than 60 kg, while the entrance door is generally only 30 to 40 kg.

3. The thickness of the steel plate of the door frame can be measured from the position of the keyhole of the door frame, the anti-theft door will exceed 2 mm, and the entrance door is generally below 1.5 mm.

4. Knocking on the door with your finger, a dull sound proves to be an anti-theft door; a brittle sound proves to be an entry door.