Routine maintenance of sterilizer
Tableware disinfection cabinet should pay attention to the following points in daily use and maintenance:
Capitalizing on our synergies as a vertically integrated company, we are reckoned as an eminent firm of the finest quality 3.5MM SPC Vinyl Flooring. The offered Vinyl Flooring is designed to meet the needs of healthcare and administrative employees, patients and visitors. This 3.5mm SPC Vinyl Flooring is comfortable and brings a quiet atmosphere to help patient's recovery and relaxation for the elderly. Our esteemed customers can avail this 3.5mm SPC Vinyl Flooring at market price within confine time to them.
3.5mm SPC Vinyl Flooring 3.5MM SPC Vinyl Flooring,SPC Vinyl Flooring,Wood Texture SPC Flooring,6MM Vinyl Plank GreenOmni Surface Co., Ltd , https://www.greenomnifloors.com
1. The disinfection cabinet should be placed horizontally with no debris around it, and it should be dry and ventilated. It should not be less than 30CM away from the wall.
2. Sort the washed tableware and other items into the basket, and ask for vertical insertion to facilitate drainage and leave gaps to avoid stacking.
3. Do not open the door when it is not necessary during disinfection to avoid affecting the effect.
4. After disinfection, the cabinet is still at high temperature, easy to burn the skin, generally 10-20 minutes before opening the container to take things, if you do not use the tableware temporarily, it is best not to open the door, so that the disinfection effect can be maintained Days.
5. Consumers should not use the sterilizer as a safe. Because the disinfection cabinet is in a sealed state, if the disinfection of the tableware stored in the cabinet is not dried, the disinfection cabinet becomes a breeding ground for bacteria. Therefore, from the perspective of safety and health, disinfection cabinets should be opened once a day as well.
6. To clean and maintain the electronic sterilizer on a regular basis, remove the water from the water collecting box at the bottom of the cabinet. When cleaning, unplug the power plug and wipe the inside and outside surfaces of the disinfection cabinet with a damp cloth. Do not use a large amount of water to rinse the electronic disinfection cabinet. If it is too dirty, wipe it with a neutral detergent and wipe off the detergent with a damp cloth. Finally dry the cloth with a dry cloth. When cleaning, do not hit the quartz heating tube and ozone generator.
7. Regularly check whether the seal is sealed well to avoid heat loss or ozone escape, which will affect the disinfection effect. When used, if it is found that quartz does not generate heat or can't hear the ozone generator's high-pressure discharge “click†sound, it indicates that the disinfector has a fault and should stop using it, and immediately send it to the maintenance department for repair.