(1) 1 kg of nitrogen fertilizer urea applied to the foliar surface, 100 kg of clear water is fully stirred and dissolved into 1% aqueous urea solution; if there is de-fermentation in the middle and late growth stages of peanuts, or continuous rainfall in the growing season of peanuts, water accumulated in the soil, and roots are difficult to absorb nutrients, ie It can be sprayed and sprayed with 60kg of urea aqueous solution per acre. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
(2) Foliar application of phosphate fertilizer Peanut has strong absorption capacity for phosphorus, and spraying calcium phosphate aqueous solution in the middle and late growth period can increase pod yield. 2-3kg of superphosphate, 100kg of water, stir and soak, after a day and night, take the upper layer of clear liquid application, usually every 7-10 days spray, even spray 2-3 times, each time spray about 60kg per acre. Care should be taken to completely remove the residue so as not to damage the blade. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
(3) Nitrogen and phosphorus are mixed in the peanut field with phosphorus deficiency and nitrogen deficiency. It can spray 1% urea and 2% calcium superphosphate mixture, which saves labor and has good effect. Preparation method: 100kg2% superphosphate Urea lkg is added to the calcium aqueous solution. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
(4) Foliar application of potassium fertilizer is generally formulated with grass ash. The preparation method is to take 5-10kg of grass ash without rain, add 100kg of water and stir well, soak for 12-14 hours, take the clear liquid, which is 5%-10% of the ash leaching liquid, spray about 60kg per acre. Potassium sulphate or potassium chloride aqueous solution can also be used. The preparation method is to add 2kg of potassium sulphate or potassium chloride in 100kg of clean water, stir and dissolve to form 2% potassium sulphate or potassium chloride aqueous solution, and spray 60kg per acre. . Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
(5) For the combination of phosphorus and potassium, take 5kg of hay ash, add 40-50kg of water to soak, and take 2kg of calcium phosphate. Sprinkle in the soaking solution, stir well, filter out the clear liquid after half a day, and add the remaining water for 20k. Then, the filtrate is combined twice, and the water is added to 100 kg, that is, potassium dihydrogen phosphate produced by the earth method, and 60 kg per acre is sprayed, and the spraying effect is obvious when the spray is performed twice. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
(6) Attention to the problem Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
1. According to the growth of peanuts and the growth period to determine the time of fertilization, generally should be applied in the late growth stage. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
2. It is necessary to choose no windy cloudy days, or spray on the sunny day before 9:00 am and after 4 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, it should be sprayed after the rain. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
3. Strictly control the concentration of spraying, the concentration is large and easy to damage the leaves, causing fat damage. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
4. Spray evenly when spraying, and spray the front and back of the leaves. Linyi Fertilizer Network Copyright
Linyi Fertilizer Network Copyright
Total 1 | <First <Prev 1 Next> Last> |
share to:
Facial Recognition Camera specs:
1, 2.0Megapixel H.265+ Smart Face Analysis IP camera;
2, Support digital wide dynamic, 3D digital noise reduction;
3, Embedded smart face algorithm, face capture at complex enviroment, face tracking,face exposure, face auto filter;
4, Support face tracking and detect for move person,capture and analysis and select the best image to upload to server;
5, Support face detect area select,multi-parameters setting including face parameters;
6, Support face image and original image upload,face image encoding can be adjustable;
7, Up to capture 15pcs face per frame;Face capture numbers can be setup;Face capture divide into two modes ;
8, General mode and Lobby mode for backlight& General environment.
9, Support face exposure function;WDR Range 0-100dB,suit for backlight enviroment.
10, Supports standard 128G Micro SD/SDHC/SDXC card storage;Support Onvif protocol, national standard GB28181;
11, Support DC 12V/ POE optional,POE +$5;3.6/6mm lens; Support CMS;Plug&Play function; Onvif.
Facial Recognition camera Another name including:
Camera Recognition,Nest Facial Recognition,Best Face Recognition,Best Facial Recognition Camera
Facial Recognition Camera
Camera Recognition,Facial recognition cctv camera,Facial recognition traffic cameras,AI facial recognition camera
Shenzhen Sanan Technology CO.,LTD , https://www.sanan-cctv.com