Electric film installation precautions

A lot of people at home have to install electric floor heating at home, but electric floor heating is divided into many types, one of which is electric heating. Many people do not know what precautions have to install electric film, following a brief introduction Xiao Bian electric film installation precautions now.

1. As far as possible in the far-infrared electric film on the floor without fixing or placing furniture without legs, (if there is no leg furniture can be considered to give up) to prevent local heat is not common, do not place a long time on the high temperature on the top The quilt, cushions and other things, otherwise the quilt, cushions will gather heat, resulting in high temperatures, will have damage to the film, the floor.

2. It is forbidden to lay fire-retardant objects on the heating area of ​​electrothermal film.

3. It is strictly forbidden to nail nails on the floor tiles of the electric film heating system that has been laid.

4. When laying (cutting) the floor or floor tile on the electric heating film, keep it clean. Do not leave debris, sharp wood chips, nails, etc. on the electric heating film, and destroy the electric heating film on one side.

5. Turn off the floor heating or low temperature settings when you are away or when nobody is in the room.

6, laying the floor recommended brand flooring, the best thickness of 0.8cm, not more than 1.2cm, too thick heat transfer is not good, not energy, brand floor environmental indicators are relatively high, so do not have to worry about harmful gases, if you find a strange smell, The use of power should be stopped in a timely manner, timely and accurate identification of the reasons, timely processing to ensure safe use.

7, the normal use of the proposed temperature is set to 35 degrees, the first time the temperature is used or not started for a long time should start from the low temperature, 15-20 degrees after a period of low temperature operation, and then transferred to the desired set temperature.

8, the ground must be laid insulation layer, northern cold areas (or ground floor) may consider increasing the thickness of the insulation layer, so that the effect will be better.

9. Each room should be equipped with a thermostat. The thermostat should be set on an easy-to-operate interior wall. It should not be placed in a sheltered or cold wall and direct sun position.

10, temperature controller to choose accurate temperature control, control area should be greater than the laying of electric film area contacts to be attached to the electric heating film at the black heat bar.

11, thermostat contact position is strictly prohibited to place objects that are not conducive to heat dissipation, otherwise it will cause inaccurate temperature control, the whole piece of electric film temperature is not balanced,

12, laying tiles should be used thin paste technology, mortar cement is best in 3cm, cement using high-quality cement, and mortar mixing ratio to meet the specifications! Lay the electric heating film above the bathroom and then put on a waterproof layer. The cement should be filled with water repellent, and the floor tiles should be treated with a waterproof agent.

Information on the installation of electrothermal membrane was introduced here for everyone. I hope this article will help you. If you still have anything you don’t understand, you can follow our website and we’ll get back to you as soon as possible.

Electric film thermostat House Decoration Notice Construction Installation Home decoration Precautions Decoration Precautions

China Fuzhou HuaRen  stone  specialize in natural stone business since 1995,
we produce natural stone sinks with simple, unique ,rustic design ,custom design
 is also welcome,presently we also focus on developing some new combination, 
which are very suitable for morden, rustic decoration style.so we produce mainly three kinds:
1.     Natural Stone Vessel Sinks 
2.     natural stone vessel sinks with wood vanity top,
3.     natural stone vessel sinks with Wrought Iron Sink Base,

 

Basin Shape: square,round,oval,retectangle, irregular

Basin Material: Granite,Marble,Onyx,Lava stone,Travertine,Basalt.

Vanity top Material:natural stone(pedestal),wood,metal.

Natural stone Basin Color:black,white,grey,beige -

Design:simple,modern , custom design is ok

Wash basin Surface finish: polished,honed,brushed-

Accessories:Matching faucet and Drain pipe sold separately

Application: bathroom

Place of Origin: FuJian, China (Mainland)

Deliver port:Xiamen

Vanity Tops With Stone Sink

Stone Pedestal Sink,Natural Stone Vessel Sinks,Natural Stone Bathroom Sink,Stone Sink Vanity

Fuzhou HuaRen International Imp&Exp.Co,Ltd , https://www.huarenstone.com