Construction details during renovation

In daily life, we can often see glass, different types of glass used in home improvement are used for differences, and there is also a great deal of stress. Glass can be roughly divided into: frosted glass, patterned glass, stained glass, wired glass, glass brick . The use of glass in home decoration includes: glass door, bathroom glass door, partition glass, glass door, glass brick partition wall, glass ceiling and so on. When it comes to glass, it is natural to think of a mirror. If there is no mirror in the living room, it is inconceivable. The position of the mirror is very important, which means what kind of mirror should be placed in what kind of space. Such as: the bedroom should be equipped with a mirror, the dining room wall should hang a large flat mirror, bathroom mirrors, display cabinets and other mirrors. Many families in the renovation have to knock down the original bathroom tiles and lay new tiles. As a result of this, it is necessary to re-waterproof the wall of the bathroom. If there is a quality problem in the waterproofing project, water stains will hit the next room, and if it is heavy, it will leak downstairs, causing serious damage to your home and neighbors. There are many kinds of materials used for bathroom waterproofing at present, basically the waterproof effect is good. But you should pay attention to the specific construction details. 1. Level the bathroom floor first. If you want to change the floor tiles of the bathroom, you must first level the floor with cement mortar after the original floor tiles are cut, and then do the waterproof treatment. This will prevent leakage of the waterproof coating due to uneven thickness. 2. Joints should be brushed into place. The seams between the bathroom wall and the seams between the upper and lower water pipes and the ground are the most prone to problems. During construction, you must urge the workers to handle these corners. All waterproof paint must be applied in place. 3. Wall treatment is also very important. In the general bathroom waterproofing treatment, a waterproof coating of about 30 cm in height is also required on the wall to prevent water accumulation from passing through the wall. However, if the wall of the bathroom is a non-load-bearing light wall, the entire wall should be covered with a waterproof coating. If your home uses a two-seater shower screen, the two walls that are associated with it must be fully painted. If your home uses a bathtub, the height of the waterproof coating should be higher than the upper edge of the bathtub.

Tile Bathtub Glass Coatings Home Decor Rooms Home Decor Glass partitions Glass display cabinets Glass partitions Screen partitions Wall cabinets Glass doors Doors Door partitions Glass doors Glass door Cabinets Bathroom Tiles Bathroom doors Bathroom ceiling materials Toilet partitions Bathroom ceilings Bathrooms Bathrooms for waterproofing Floor tiles Restaurant ceilings

Other Pipe fittings

Melt Plastic Pipe Fitting,Pe Pipe Fitting,Frp Plastic Pipe Fitting,Plastic Pipe Fitting

Zhongyan Machinery Co., Ltd. , http://www.juhengflanges.com