Children's room tile laying precautions
First of all, it is to arrange the child's seat and the height of the bed. Although the radiation of most of the tiles on the market is within the safe range, some imported materials also have radioactivity exceeding the standard. Therefore, consumers should put the children The seat for a long time and the bed are placed over a range of one meter high. Of course, for the seat, it is only necessary to meet the head above one meter. Because the density of these harmful substances produced by ceramic tiles is larger than that of air, it will be in the lower layer of the air. Like our houses, the air quality on the floor with the lowest position is the worst. This is the reason. Secondly, some consumers in our daily life use a highly corrosive solution to clean the tiles. These solutions bring two hazards: First, the solution and the tile will undergo a certain chemical reaction, causing the color of the tile to become It is ugly, but it also affects the quality of the tile, which means that the tile life will also be reduced. Second, after the surface material of the tile reacts with the solution, some tiny powdery substances are left on the surface of the tile. In fact, we can also regard them as dust. These powders are very harmful to the human body after being inhaled into the lungs. In particular, if some of the radiation inside the tile is exposed, the amount of radiation generated will also increase. Finally, of course, the waterproof performance of the tile, this waterproof performance has an impact not only on the indoor environment, but also on human health. Consumers should not only know the influence of aesthetics. If the moisture does not fade on the tile for a long time, does the indoor humidity increase a lot? Especially in some hot flashes, the air humidity is large, and the indoor humidity is too large. Causes symptoms such as internal heat stagflation. Therefore, we must purchase the ceramic tiles in accordance with the basic principles of health and safety, and then select the style and color of the tiles, and pay attention to the weight of the tiles. Generally, the heavier the weight, the better the quality.
Product name Modified Aluminum Tripolyphosphate
CAS No 13939-25-8
EC No 237-714-9
Chemical formula Al5.(P3O10)3
Appearance White Powder
Storage Keep the product in a tightly closed container ,Isolate form any source of heat or ignition and moisture
Packing unit 25kg Poly Propylene bag & 500kg Poly Propylene bag,
Any size customers want.
Application Material for anti-corrosion paint used in container,
Ship and steel structures .Electronic materials
Goods characteristics White Powder.
Soluble in acid or alkali solution ,insoluble in water or alcohol.
CHEMICAL ANALYSIS
TEST ITEM
UNIT
REQUIREMENT
Whiteness
%
80-90
Al2O3
wt.%
13-20
P2O5
40-46
SiO2
wt.%
8-12
ZnO
wt.%
20±5
Moisture
wt.%
Max1.0
Oil absorption
ml/100g
25-35
The PH Value
-
5.5-7.0
Residue on sieve (325mesh)
wt.%
Max0.5
Mean Particle Size
μm
13/44
Modified aluminum tripolyphosphate (EPMC) Modified Aluminum Tripolyphosphate (Epmc), Aluminium Phospate,Aluminum Dihydrogen Phosphate Powder shijiazhuang city xinsheng chemical co.,ltd , http://www.xsphos.com