Building deformation joint seepage, how to adjust aluminum waterproof after bending
[China Aluminum] mesh deformation joints must be embedded in the structure before the concrete pouring, the width of the concrete should be greater than 80mm, about 100mm above and below the concrete, deformation joints can be based on deformation joints The nature of the adjustment, pre-buried to be fixed: first accurately on the template to draw the position line of aluminum, and then according to the drawn position line to a vertical diameter of not less than 16 steel welded in the already tied Beam reinforcement, and then use aluminum wire fixed on the bar, if the beam protruding wall, the aluminum plate should be placed in the beam reinforcement frame, then the beam end of the aluminum plate stirrups do not tie, the seam on both sides of the template in the installation At this time, the template needs to be broken at the position of the aluminum plate. When reinforcing, a steel pipe is inserted close to the aluminum plate and then squeezed with a wooden wedge. When the concrete is poured, the layer is poured here.
PE Tarpaulin is used for cover and protect the goods in the open air or warehouse.
It is also called ready made tarpaulin, PE tarps, Lonas ,PE Tarpaulin Sheet , plastic tarp , PE Canvas Tarpaulin ect.
Because of the PE tarpaulin is water-proof,washable,anti-rot,UV stabilized.And it is very portable and can be transported and setup easily. So It is widely used in our usual life and industry.
The material of PE tarpaulin l is 100% virgin granular polyethylene.
It is 3 layers.HDPE woven fabric in the middle +LLDPE lamination on both sides.
Here is the details:
Weight: 45gsm ---300gsm
Color: any color available upon customer's request including:
Blue PE Tarpaulin
Green PE Tarpaulin
White PE Tarpaulin
Grey PE Tarpaulin
Red PE Tarpaulin
Brown PE Tarpaulin
Clear Tarp
Camouflage Tarp
Stripe Tarpaulin
Size: any sizes available, subject to customer's order
Shape: any shape can be made as per customer's design
Details: Reinforced polypropylene rope in welded hems.
Rust resistant aluminium grommets or plastic eyelet every 3 feet or every 1 meter
Other details you can choose:
4 black reinforced corners each piece
D rings on the PE tarpaulin
Other design from the customers
Packing:Each tarpaulin is folded and put in a transparent polybag with a paper insert
Suitable pieces pressed in a bale , or put in a carton or display.
PE Tarpaulin PE Tarpaulin,Tarpaulin Sheet,Canvas Tarpaulin,Waterproof PE Tarpaulin HEBEI OHONG PLASTIC CO. LTD. , https://www.tarpaulin-factory.com
The above content is based on the problems encountered by the students in the actual work, for reference, if you have any questions, please communicate and correct.
