Bathroom decoration need to pay attention to what the problem

First, the ground waterproof

There are many kinds of waterproof material, and the most popular one is water repellent. When laying a waterproof layer, it should be spread to about 20 cm above the foot of the wall. It must not be lower than the height of the lintel. When there is a reserved pipe on the floor, the waterproof layer needs to wrap the reserved pipe. After the waterproofing of the floor is done and dried, it must be immediately primed with cement mortar or protective measures to prevent damage to the waterproof layer.

Second, the threshold

The threshold is a barrier that prevents water from overflowing the bathroom. Its design and construction points are:

1) The upper plane of the sill is to be tilted towards the inside of the bathroom so that the water droplets can slide smoothly into the bathroom;

2) The threshold should be the same as the width of the door frame, and the thickness of the door frame should be the same as the thickness of the wall so that there will be no large access when laying the floor tiles, and the chance of creating a breach will be relatively reduced.

Third, the laying of floor tiles

There are three essentials for laying floor tiles:

1) There must be about 1 percent of the discharge slope and the slope is towards the floor drain;

2) The seams of the tiles must be the same in thickness, and must be aligned with the seams of the tiles;

3) When the front wall of the bathtub is tiled with tiles, the tiles are best affixed to the bottom of the wall before they are attached to the wall to avoid breakage.

Fourth, washing face

The surface of the washboard countertop should be selected to be “all-in-one” (ie, the surface material of the countertop is consistent with the internal material composition and color), and a countertop with only one surface of the plastic shell cannot be selected because only the surface of the surface of the plastic shell can be repaired once it is damaged. (To test whether the countertop is "fullbody", you can use the light to illuminate from the back of the room. Light-transmissible is the "full-body" countertop). In addition, joints must be applied to the joints between the tabletop and the washbasin to prevent the water from oozing from the joints.

Fifth, the toilet

Generally, when installing a toilet, it is customary to use cement mortar to fill the toilet to fix the toilet. In fact, this method is wrong. After this method is used to fix the toilet, the toilet cannot be disassembled again. If the pipeline is seriously blocked, only knock it off. Toilet one way.

Sixth, exhaust fan

When people build houses, they usually pay less attention to bathroom ventilation equipment. Most of them only install an exhaust fan. The bad gas in the bathroom cannot be discharged outside and still just circulates in the bathroom.

Floor Tile Flooring Toilet Bathroom Cement House Floor Tile Tile Rubber Floor Tile

Size of UPVC Wall Panels: 200mm x 8mm, 220mm x 8mm, 250mm x 8mm, 250mm x 5mm, 250mm x 10mm, 300mm x 10mm, 400mm x 10mm.

Type: Artistic Ceilings, Honeycomb Ceilings, Integrated Ceilings, Perforated Ceilings.

Material: PVC (50%, 60%, 70%, 85% or as your request), Caleium Carbon and other chemicals

Weight: 2-4 kg/sqm

Feature: Fireproof, Heat Insulation, Moisture-Proof, Mould-Proof, Smoke-Proof, Sound-Absorbing, Soundproof, Waterproof, Fire,Moisture,Mould Proof.

Surface Treatment: Oil print, hot stamping foil, thermal transfer print, laminated and so on as your pattern and color.

Surface Effect: Bright/glossy, high glossy, matt, gleam, roller coating and so on

Quality Guarantee: 25 years.

Certificate: ISO9001:2000, Soncap, Intertek, SGS.

Application: Hotels, commerical buildings, hospital, schools, home kitchen, bathroom, indoor decoration and so on.

Pictures of UPVC Wall Panels:

upvc wall panel

UPVC Wall Panels

UPVC Wall Panels, UPVC Bathroom Ceiling, Waterproof Wall Panels

Zhejiang Huaxiajie Macromolecule Building Material Co., Ltd. , http://www.pvcbuildingdeco.com